Misting Cooling Systems Outdoors China Manufacturer

Model NO.: HT1114
Trademark: ECOWIS
Origin: China
Model NO.: HT1114
Trademark: ECOWIS
Origin: China
Low Pressure Outdoor Patio Misting System
Item No.: HT1104
Desp.: Water Misting Systems Outdoor Cooling, Misting Cooling Systems Outdoors

The Portable Outdoor Mist Cooling System provides relief from the heat wherever you need it.
This preassembled kit provides mist cooling and cools the surrounding air temperatures by up to 11 degrees Celcius.
Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling.
No power is required. (low pressure, connect to the facuet is OK)
Great for providing outdoor cooling wherever you need it.
Installs in less than 10 minutes.
Attaches to any standard garden hose.
For outdoor use with cold water only.
 
Product Name Low Pressure Outdoor Patio Misting System
Tube length available 6m/ 9m/ 12m/ 15m
Tube Material Food-grade PE
Vinyl Tubing Size 1/4"
Nozzle Material Brass with stainless steel plate
Nozzle Orifice dia 0.2mm/ 0.3mm/ 0.4mm/ 0.5mm
Nozzle Srew Type 3/8" 10/24" 12/24" UNC
Nozzle Base Material PVC
Flow Rate 0.3-2L/min per nozzle
Max Pressure 45psi ( 30 Bar)
Ability Cool down 7-10ºC around temperature
 
Item Parts List
HT1114-06 3M water supply hose with 3/4" garden hose adaptor
3M  misting line with 6 nozzle bases
8pcs brass nozzles (2 for spare).
20pcs saddle clamps, 20pcs cable ties.
HT1114-09 3M water supply hose with 3/4" garden hose adaptor
6M  misting line with 6 nozzle bases
13pcs brass nozzles (2 for spare).
30pcs saddle clamps, 30pcs cable ties.
HT1114-12 3M water supply hose with 3/4" garden hose adaptor
9M  misting line with 6 nozzle bases
18pcs brass nozzles (2 for spare).
40pcs saddle clamps, 40pcs cable ties.
HT1114-15 3M water supply hose with 3/4" garden hose adaptor
12M  misting line with 6 nozzle bases
23pcs brass nozzles (2 for spare).
50pcs saddle clamps, 50pcs cable ties.

 Installation Instruction:
All fittings should be installed by working the tubing through the hole. No leakage will occur when properly installed.
1)  Screw in the nozzles into the fittings until finger tight. Do not over-tighten.
2)  Insert tubing into small end of Garden Hose Adapter and push screen filter into threaded end with cone pointing out. Connect Hose Adapter with attached tubing to water supply and unroll hose to determine desired placement. Avoid locations with prolonged exposure to direct sunlight if possible. 
3)  Determine desired spacing for installation of misting tees (recommended spacing 2-3 feet). Using scissors, cut hose and insert misting tees in desired position along the length of tubing.
4)  After misting tees have been installed, cut off any excess tubing and install End Elbow to complete the system. Save the excess tubing in the event that you choose to expand the system further in the future.
5)  Use included nail-on clamps to fasten tubing to the mounting surface.
  Low Pressure Outdoor Patio Misting System
Item No.: HT1104
Desp.: Water Misting Systems Outdoor Cooling, Misting Cooling Systems Outdoors

The Portable Outdoor Mist Cooling System provides relief from the heat wherever you need it.
This preassembled kit provides mist cooling and cools the surrounding air temperatures by up to 11 degrees Celcius.
Simply attach the convenient alligator clips to an umbrella, awning, fence or other structure and then connect to a standard garden hose to immediately experience the benefit of mist cooling.
No power is required. (low pressure, connect to the facuet is OK)
Great for providing outdoor cooling wherever you need it.
Installs in less than 10 minutes.
Attaches to any standard garden hose.
For outdoor use with cold water only.
 
Product Name Low Pressure Outdoor Patio Misting System
Tube length available 6m/ 9m/ 12m/ 15m
Tube Material Food-grade PE
Vinyl Tubing Size 1/4"
Nozzle Material Brass with stainless steel plate
Nozzle Orifice dia 0.2mm/ 0.3mm/ 0.4mm/ 0.5mm
Nozzle Srew Type 3/8" 10/24" 12/24" UNC
Nozzle Base Material PVC
Flow Rate 0.3-2L/min per nozzle
Max Pressure 45psi ( 30 Bar)
Ability Cool down 7-10ºC around temperature
 
Item Parts List
HT1114-06 3M water supply hose with 3/4" garden hose adaptor
3M  misting line with 6 nozzle bases
8pcs brass nozzles (2 for spare).
20pcs saddle clamps, 20pcs cable ties.
HT1114-09 3M water supply hose with 3/4" garden hose adaptor
6M  misting line with 6 nozzle bases
13pcs brass nozzles (2 for spare).
30pcs saddle clamps, 30pcs cable ties.
HT1114-12 3M water supply hose with 3/4" garden hose adaptor
9M  misting line with 6 nozzle bases
18pcs brass nozzles (2 for spare).
40pcs saddle clamps, 40pcs cable ties.
HT1114-15 3M water supply hose with 3/4" garden hose adaptor
12M  misting line with 6 nozzle bases
23pcs brass nozzles (2 for spare).
50pcs saddle clamps, 50pcs cable ties.

 Installation Instruction:
All fittings should be installed by working the tubing through the hole. No leakage will occur when properly installed.
1)  Screw in the nozzles into the fittings until finger tight. Do not over-tighten.
2)  Insert tubing into small end of Garden Hose Adapter and push screen filter into threaded end with cone pointing out. Connect Hose Adapter with attached tubing to water supply and unroll hose to determine desired placement. Avoid locations with prolonged exposure to direct sunlight if possible. 
3)  Determine desired spacing for installation of misting tees (recommended spacing 2-3 feet). Using scissors, cut hose and insert misting tees in desired position along the length of tubing.
4)  After misting tees have been installed, cut off any excess tubing and install End Elbow to complete the system. Save the excess tubing in the event that you choose to expand the system further in the future.
5)  Use included nail-on clamps to fasten tubing to the mounting surface.
 

We offer modified  PP Resin materials for you .Among the raw materials we use,  some kinds are imported medical-level pellets and some are chinese local raw materials.We can manufacture the products as clients need. Our products can be used for injection packing products, such as PP joint for transfusion bag , Pp Cap for medical container etc. More details, pls contact us as soon as possible. We are looking forward to cooperate with you and wish offer the best products to you.

PP Resin For Outer Cap/inner Cap

Pp Resin For Outer Cap,Pp Resin For Inner Cap,Pp Homo Polymer Resin,Pp Resin For Pp Caps

SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , http://www.crh-health.com