When the operator fills, be sure to be optimistic, do not enter the debris in the material, master the temperature, if a material does not become a sticking head when the machine is turned on, the temperature of the die is too high, and it can be normal after a little cooling. Under normal circumstances, there is no need to stop. The water temperature should generally be 50---60 °C, which is easy to break the strip, and it is easy to stick. When the initial start-up, Zui adds half of the hot water. If there is no condition, the pellet can be transported to the pelletizer for a period of time, etc. After the water temperature rises, let it automatically pelletize to avoid broken strips. After the water temperature exceeds 60 °C, it is necessary to add cold water to the inner circulation to maintain the temperature. When granulating, be sure to pull the strips before entering the rolls, otherwise the granulator will be damaged. If the vent hole is out of the competition, it proves that the impurity has blocked the filter. At this time, the mesh should be replaced by a quick stop. The mesh can be used with 40---60 mesh.
Electronic Cigarette Accessaries
Electronic Cigarette Accessories of Various of products, including Mechanical Mod Tube series, Vape series and Drip tip, provide product pictures and basic parameters, we are committed to supply chain management, we are a professional Chinese manufacturer of Mechanical Mods Kit and we are looking forward to your cooperation.
Electronic Cigarette Accessaries
Electronic Cigarette Accessories,Electronic Cigarette Vape,Electronic Cigarette Drip Tip,Mechanical Mod Tube,Vape E Cig
Dongguan Marvec Electronic Technology Co.,Ltd , http://www.marvec-cn.com