Commissioning of gas-filled beverage filling machine before starting up

1. First loosen the nut of the automatic filling machine and adjust the screw to change the position of the lower fixing rod. The push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the packing amount. The screw is adjusted clockwise to increase. On the contrary, the amount is reduced, and the pointer has an indication.
2. Immediately after adjustment, the nut is tightened, so that the lower fixing rod and the crank are firmly fixed.
3. Loosen the nut and determine the correct position of the upper fixing rod according to the push-pull length of different syringes. After the lower fixing rod is adjusted, turn the crank to turn the syringe to the top dead center, then lift the outer sleeve of the syringe upward by about 2mm to avoid Rotate the needle tube and tighten the nut before turning it on.
4. After the assembly of the gas-filled beverage filling machine is correct, the switch is turned on. When the machine is working, the pump is driven by the crank to pull down the liquid, adjust the speed knob, select the appropriate dispensing speed, start normal operation, adjust the governor knob, clockwise The dispensing speed is fast, and the speed is slow.
The company's main business: juice filling machine , gas beverage filling machine , PET bottle filling machine , glass bottle filling machine  

Hespax Anti Impact TPR Gloves

Hespax TPR Gloves,Work Wear Gloves Nitrile,Hppe Cut Resist Gloves Black,Impact Safety Glove

Jiangsu Hespax Security Co., Ltd , https://www.hespax.com