Because the structure of Henan Lanfan Rotary Evaporator is fine and rigorous, if it is not operated properly, it may damage the rotary evaporator or cause structural changes to reduce the accuracy and shorten the service life of the rotary evaporator. Therefore, the surveyor must attach great importance to the spirit in the spirit of being extremely responsible for the state and collective property, and do the instrument: careful care and proper use.
A. Handling of rotary evaporator
1. The rotary evaporator must be carried by the measuring personnel, must not collide, and must not be placed upside down.
2, Rotary evaporator consignment, must be placed in a cushioned shock-proof box, and marked "not inverted" on the outside of the box, write "optical or electronic equipment, carefully put, do not stress." If necessary, send someone to escort.
3. When the rotary evaporator is transported by the car, it should be prevented from being bumped and shaken. It should be placed on the front cushion of the car, or placed on the leg by the person, or on the back, not on the bottom of the car. On the cabinet.
4. When moving at a short distance, the instrument should be held vertically so that the instrument maintains the vertical state of the vertical axis. Remember not to lie on the shoulder to avoid hurting the instrument or damaging the shaft of the instrument.
B. Unpacking, packing and closing the rotary evaporator
1. After the rotary evaporator is turned on, familiarize yourself with the corresponding position of each component. When taking the instrument, hold the bracket with one hand, hold the bracket with one hand or hold the bracket with both hands, and slowly take it out. It is strictly forbidden to use a portable telescope or a horizontal axis.
2. Before removing the instrument, first place the tripod, put it on the tripod immediately after removal, and fix it with the center screw.
3. The rotating evaporator should not leave the instrument before packing.
4. When the rotary evaporator is packed, the brake screw should be fixed or loosened according to the type of the instrument. When the parts are placed in their respective positions, the cover can be lightly closed and the hooks on both sides can be fastened.
5. When checking the box, pay attention to the inspection tools and accessories to see if they are properly placed, so as not to shake the equipment during transportation and damage the instrument components.
6, the box and the cover, when you feel that there are obstacles, you should find out the reasons, and then remove the cover. Hard pressure and hard buckle are strictly forbidden.
Fresh Cut Shredded Auricularia auricula
Fresh Cut Shredded Auricularia Auricula,Shredded Auricularia Auricula,Dried Wood Ear Shreds,Jelly Ear
Guangyun Agricultural Biotechnology (Jiangsu) Co., Ltd , https://www.7-mushrooms.com