As with other equipment, the automatic chamber filter press must be maintained and maintained in a timely manner.
1. The hydraulic system should be inspected regularly and the pressure gauge should be checked regularly. Regular oil replenishment and oil change, so that hydraulic oil quality and quantity. The hydraulic oil is mostly No. 20 oil, which is usually replaced once every six months. Under high temperature conditions, the oil change time should be shortened appropriately. The oil temperature is generally 35 to 60 ° C, and less than 10 ° C requires heat treatment.
2, the components are always well lubricated, oiling on time, and cleaning up the dirt, usually at least once per shift. The bearing is lubricated with butter for half a year to one year.
3. The electrical control device should be kept clean, and all components should be inspected regularly to keep it sensitive, safe and reliable.
4. Check whether the connected parts are loose after stopping and tighten them at any time.
5. If the machine is out of service for a long time, it should be scrubbed cleanly. The moving parts and exposed parts should be coated with anti-rust oil and put on the plastic hood.
6. When maintenance and overhaul, the power should be cut off to prevent accidents.
7. Always clean the machine and clean the site to ensure smooth working channels.
1. The hydraulic system should be inspected regularly and the pressure gauge should be checked regularly. Regular oil replenishment and oil change, so that hydraulic oil quality and quantity. The hydraulic oil is mostly No. 20 oil, which is usually replaced once every six months. Under high temperature conditions, the oil change time should be shortened appropriately. The oil temperature is generally 35 to 60 ° C, and less than 10 ° C requires heat treatment.
2, the components are always well lubricated, oiling on time, and cleaning up the dirt, usually at least once per shift. The bearing is lubricated with butter for half a year to one year.
3. The electrical control device should be kept clean, and all components should be inspected regularly to keep it sensitive, safe and reliable.
4. Check whether the connected parts are loose after stopping and tighten them at any time.
5. If the machine is out of service for a long time, it should be scrubbed cleanly. The moving parts and exposed parts should be coated with anti-rust oil and put on the plastic hood.
6. When maintenance and overhaul, the power should be cut off to prevent accidents.
7. Always clean the machine and clean the site to ensure smooth working channels.
Matcha Tea Kit,Matcha Tea Private Label,Matcha Powder Private Label,Matcha Private Label
SHAOXING ROYAL TEA VILLAGE CO.,LTD , https://www.yccmatcha.com