Eight methods for precipitation in the corn field

1. Standing stalk stalk skin drying: When corn enters the ripening stage, when the grain moisture content is about 40%, it is suitable for precipitation. The method is to open the corn husks and scoop them in the end so that the sticks can be exposed and aired. After about 20 days, the moisture can be reduced to about 16.3%. 2. Late harvest: In order to reduce the moisture, the harvest can be delayed properly for about 10 days. The corn is exposed to the sun and it is naturally raining. This method can reduce the moisture of corn to about 20%. 3. Drying: After harvesting, the corn shall be plucked in the ground and put on the straw, such as corn, to dry it, put it flat, put it up and down, and drain quickly. Water can be reduced to 18% after 20 days. 4. Take a small stack: After entering the field, use corn straw and other materials to make a small stack, with a diameter of 1.2 meters. The bottom of the stack is well covered with stones, bricks or wooden sticks to facilitate ventilation and precipitation. In order to accelerate precipitation, ventilation equipment can be installed in the middle of the stack with stalks and other materials. The top of the stack should be covered with rain. 5. Code dumplings: Select the Gaozao place to put the corn cobs of the light skin into a one-meter-wide rice dumpling, which is not limited in length. To prevent the rain from picking up, it can reduce the moisture to 1 month. About 18%. Close to standard moisture.

Polyglutamic acid is a natural occurring, multi-functional, and biodegradable biopolymer. It is produced through fermentation by Bacillus subtilis using glutamic acid. PGA is consists of glutamic acid monomers cross-linked between α-amino and γ-carboxyl groups, and the molecular weight of PGA is usually between 100~1000 kDa. It is water-soluble, edible and non-toxictowards human, and is environment friendly. It has broad applications in the fields of medicine, food, cosmetics, and water treatment.


*Base Fertilizer:

Use it about 10kgs for a unit of area, then irrigate with clean water or muck water. Or irrigate amino acid together with water. Or fertilize with other compound fertilizers, broadcast application, hole application both are ok. It is applicable to all the crops.

*Foliar Fertilizer:

Dilute it by 800-1000 times and spray directly. Also, it can spray by mixed with trace element. Use 200-500g for a unit of area.

*Compound Fertilizer & Irrigation Fertilizer:

It can be added to compound fertilizer by rate of 5-8%, improve the nutrient content of compound fertilizer, increases crops` direct absorption.


Advantage For Fertilizer Gamma-PGA

1.Easy and high-efficacy absorption by plants.

2.Help the absorption and the translocation of the nutrients in cells.

3.Improves the immune system of the crops and increases their resistance against diseases, severe weather.

4.Simulates protein synthesis and gives strength to plants accelerating their growth


Agricultural Grade Poly-γ-glutamic Acid

Poly Gamma Glutamic Acid,Agricultural Grade Poly-Γ-Glutamic Acid,Agricultural Grade Poly Glutamic Acid,Agricultural Grade Acid

Qufu Hi-Tech Trading Co., Ltd. , http://www.chinahyaluronic-acid.com